EPOXY GROUT > HYDRAPOX 124 - EPOXY GROUT HIGH STRENGTH

Hydrapox 124 is a solvent free epoxy resin based product designed for grouting or being used as steel plate adhesive for gaps of widths from 10 mm to 120 mm particularly and where high service temperatures are present. The components of Hydrapox 124 are supplied in the correct mix proportions designed for whole pack mixing so that flow, adhesive bonding and mechanical properties are consistent.

Uses 
Applications include heavy duty supports beneath crane and transporter rails, high speed turbines and centrifuges, drop forges, reciprocating machinery and other operating or test equipment subject to heavy dynamic or repetitive loads. Therefore an epoxy grout and paste where the mechanical properties and heat resistance of the hardened grout must be of the highest order.

Advantages 

  • Suitable for use in high temperature operating environments with continuous service temperatures up to º 150 C.
  • High flexural strength and adhesion to substrate ensure excellent performance under dynamic load situations
  • High early strength performance allow minimum down time and early commissioning of plant.
  • Simple mixing properties ensure a convenient application and total bearing support.
  • Withstands attack by a wide range of chemicals, acids and alkalis.
  • Epoxy resin adheres to contact surfaces with no loss of bond.
  • High compressive and tensile strengths ensure durability and long term service.
  • Designed for low creep characteristics under sustained loading and elevated temperatures.
  • Pre-measured, factory controlled materials allow reproducible flow and mechanical properties.

Physical Properties : at 25°C

  • Pot life 
    ~ 1 hours @ 25°C
  • Tensile strength 
    36 N/mm² at 7 days 36 N/mm² at 7 days 
  • Flexural strength 
    25 N/mm² at 7 days 
  • Compressive strength 
    80 N/mm² at 1 day 
    95 N/mm² at 3 days 
    100 N/mm² at 7 days 
  • Shear strength 
    20 N/mm² at 7 days 
  • Service temp
    -10°C - 150°C
  •  Packing 
    3 parts (A=Base + B=Hardener + C=Filler) 10 kg/set

Made in Thailand

Online Support

Chat Zalo

TIEN DANH CO.,LTD
Office: 13 / 3B Truong Chinh, Group 17, Block 2, Tan Hung Thuan Ward, District 12, HCMC
Tel: 08.6256 8494 - Hotline: 0983.277.226 (Mr. Tich - Engineer)
Fax: 08.62568493
Email: ctytiendanh@yahoo.com website: www.antiwa.com